Rek.BCA 868.034.7493 A/N Ferdi Susanto
Melayani COD Dki Jakarta
Rumahnavtech@yahoo.com
CS Kami ( 021-22633079 )
Radio RIG Icom IC 2300H model terbaru radio rig dari Icom dengan power output 65W body terbuat dari bahan aluminium menyediakan pembuangan panas lebih efektif dan tidak mudah panas.
Radio RIG Icom IC 2300H salah satu radio rig yang handal & tangguh untuk berbagai aktifitas serta dapat berkomunikasi seketika dan dapat diandalkan untuk mempertahankan dinamika kerja tim anda secara efisien.
Frequency coverage TX: 144–148MHz, RX: 136–174MHz* Number of channels 207 channels (including 6 scan edges, and 1 call) Type of emission F2D, F3E (FM) Power supply requirement 13.8V DC ±15% Current drain Tx (65W) 11A Rx Stand-by 0.4A Max. audio 1.5A Antenna impedance 50Ω (SO-239) Operating temperature range –10°C to +60°C; 14°F to +140°F Dimensions (projections not included; W×H×D) 140×40×162 mm; 5.51×1.57×6.38 in Weight (approx.) 1.1 kg; 2.43lb * Guaranteed range TX/RX: 144–148MHz
Transmitter
Output power* (at 13.8V DC) 65W, 25W, 10W, 5W Max. frequency deviation Wide ±5.0kHz Narrow ±2.5kHz Spurious emissions Less than –60dBc Frequency stability ±3ppm Microphone impedance 600Ω (8-pin modular) * Output power differs depending on version and specific regulatory requirements.
Receiver
Intermediate frequencies 46.35MHz/450kHz Sensitivity at 12dB SINAD Less than 0.18μV Adjacent channel selectivity Wide More than 6kHz (at 6dB) Less than 14kHz (at 60dB) Narrow More than 3kHz (at 6dB) Less than 9kHz (at 55dB) Spurious response rejection More than 60dB Audio output power 4.5W typ. (10% dist. 4Ω load) External speaker connector 2-conductor 3.5 (d) mm (1⁄8ʺ)/4Ω Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Standard MIL 810G Method Procedure Low Pressure 500.5 I, II High Temperature 501.5 I, II Low Temperature 502.5 I, II Temperature Shock 503.5 I-C Solar Radiation 505.5 I Vibration 514.6 I Shock 516.6 I, IV Also meets equivalent MIL-STD-810-C, -D -E and -F. All stated specifications are subject to change without notice or obligation.